Sie sind vermutlich noch nicht im Forum angemeldet - Klicken Sie hier um sich kostenlos anzumelden Impressum 
Sie können sich hier anmelden
Dieses Thema hat 28 Antworten
und wurde 3.665 mal aufgerufen
 Empfänger, Servos, Multiswitch
Seiten 1 | 2
hun Offline




Beiträge: 198

01.09.2013 09:13
Deltang Rx43d-1-v5 Zitat · Antworten

Hallo Leute,

habe da mal ein kleines problem. Ich habe den Empfämger mal letzte tage in eines von meinen Fahrzeugen eingebaut. Nur meiner meinung nach kann man den on board Fahrtenregler nur sehr schlecht im untersten drehzahl bereich steuern. Heist wenn man den Knüppel nur anstöst fährt er schon fast mit voller geschwindigkeit. Woran liegt das? Kann ich da irgendwas umprogrammieren das es besser wird? Verbaut ist ein Getriebemotor von Solexpert.

Mit freundlichen Grüßen

Andreas


Yakle Offline



Beiträge: 184

06.09.2013 21:48
#2 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Hallo Andreas,

ich habe das gleiche Porblem, kann die geschwindigkeit auch kaum mit meiner DX7 regeln! Leider habe ich noch keine lösung finden können!
Hoffe hier kann uns noch jemend helfen( vieleicht Barni).

Grüßle Kay


Bernhard Offline




Beiträge: 1.152

07.09.2013 06:01
#3 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Hallo,

da fällt mir momentan nur "EXPO" im Sender ein....

Gruß
Bernhard


hun Offline




Beiträge: 198

07.09.2013 17:44
#4 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Habe ich schon gemacht aber das bringt auch nicht viel. Ich habe gelesen das man die Tacktung oder so verstellen kannst. Hilft das?


Bernhard Offline




Beiträge: 1.152

07.09.2013 18:27
#5 RE: Deltang Rx43d-1-v5 Zitat · Antworten

einen Versuch ist es immer wert...


Bernhard Offline




Beiträge: 1.152

08.09.2013 07:35
#6 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Servus,

hab von David diese Antwort erhalten....

Hi Bernhard,
Thanks for making contact

Rx43d has ~64 steps motor control in both directions. The increase in power is linear when the Ch3 stick is moved from mid position (0%) to max position (100%). At what stick position does the vehicle start to move? Perhaps it only starts to move at 50% stick position which would make slow speed control difficult. Perhaps there is too much gearbox friction. Perhaps the vehicle is too heavy for the motor or receiver power. Perhaps the motor output on the receiver is faulty.

Is it possible for Andreas to try a different motor (not in the vehicle)? If possible one with no gearbox. Does that work correctly? Does it still work correctly when he adds some load/friction by slowing the motor with his fingers?
Regards, David.

Nun liegt es an Euch,David mit Infos zu versorgen...

Viel Erfolg
Barnie


Achilles1705 Offline



Beiträge: 85

08.09.2013 23:03
#7 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Guten Abend,
auch ich habe gleiches Problem bei meinem Empfänger RX43d ...
Ich habe es bereits mit zwei Getrieben versucht & bei allen das gleiche Ergebnis vorgefunden:
Bei einer leichten Stickbewegung nach oben/unten, arbeitet alles - aber keine Bewegung des Fahrzeugs!
Dies war bei beiden Getriebemotoren (1:48, 1:120) der Fall.
Erst bei weiterer Bewegung des Sticks nach oben/unten, erfolgt dann die Fahrbewegung.


Auf Antwort & Ratschlag hoffend

Achilles


Bernhard Offline




Beiträge: 1.152

13.09.2013 14:20
#8 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Servus,

David (DavidT)alias Mr.Deltang ist jetzt auch präsent...

http://www.deltang.co.uk/index.htm


Gruß
Bernhard


DavidT Offline



Beiträge: 9

13.09.2013 15:40
#9 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Hello, I make DelTang receivers. Thank you for your support. I am sorry I do not speak German but I will use Google translation.

Example: If you have 3.7v lipo and your motor needs 2.0v to start turning, then motor will only work from 54% (2.0/3.7*100). Do you think this is why you have these problems?

Rx61-3 has M-MIN setting. See graph. Will this help?
Regards, David.



Google:
Hallo, ich mache Deltang Empfängern. Vielen Dank für Ihre Unterstützung. Es tut mir leid ich spreche kein Deutsch, aber ich werde Google Übersetzung verwenden.

Beispiel: Wenn Sie 3.7v Lipo und haben Ihr Motor benötigt 2,0 V bis zu drehen beginnen, dann Motor nur von 54% (2.0/3.7 * 100) zu arbeiten. Glaubst du, das ist, warum Sie diese Probleme haben?

RX61-3 hat M-MIN-Einstellung. Siehe Grafik. Wird das helfen?
Regards, David.


Bernhard Offline




Beiträge: 1.152

13.09.2013 15:52
#10 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Hi David,

would it be possible,to Programm the "Start Turning" also in your other Receivers with internal ESC's??

Regards
Bernhard


DavidT Offline



Beiträge: 9

13.09.2013 16:26
#11 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Hi Bernhard,
Rx61 has 32kb memory. Rx43d has 8kb memory. Rx43d memory is full. What features can I remove from Rx43d to make space?
Regards, David.

Hallo Bernhard,
RX61 hat 32kb Speicher. Rx43d hat 8KB Speicher. Rx43d Speicher voll ist. Welche Funktionen kann ich von Rx43d entfernen, um Platz zu machen?
Regards, David.


Bernhard Offline




Beiträge: 1.152

13.09.2013 17:02
#12 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Hi David,

RX 43 with 32kb Memory....,
Programm via PC....

Regards
Bernhard


DavidT Offline



Beiträge: 9

13.09.2013 17:20
#13 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Program via PC I am still thinking how to do.

When do we need DSMX and >7ch?

If I need space can I remove:
1. 'Full stick' motor control (low throttle = off)?
2. P1/P2 2-channel servo mix?
dt.


Programm via PC Ich bin immer noch denken, wie zu tun ist.

Wann müssen wir DSMX und> 7ch?

Wenn ich Platz benötigen kann ich entfernen:
1. 'Full-Stick' Motorsteuerung (Low Gas = off)?
2. P1/P2 2-Kanal Servo-Mix?
dt.


Bernhard Offline




Beiträge: 1.152

13.09.2013 17:32
#14 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Hi David,

i do not need 1 and 2

Regards
Bernhard


nachtdieb Offline




Beiträge: 1.283

13.09.2013 23:12
#15 RE: Deltang Rx43d-1-v5 Zitat · Antworten

Hi David,

nice to see you here. I,m using also your receivers. I think, the mixer could be removed.

@all: Use anybody the mixer function ???

Best regards
Klaus


Seiten 1 | 2
 Sprung  

disconnected Mikromodell-Chat Mitglieder Online 7
Xobor Xobor Community Software
Datenschutz